Introduce what issues need to be paid attention to in the charging of multifunctional snack carts
It is strictly forbidden to lose electricity during storage: The battery of the multifunctional snack truck is strictly prohibited from losing electricity when it is stored. The state of power loss means that the multifunctional snack truck is not charged in time after being used. When the battery is stored in a state of depletion, sulfation is prone to occur. Lead sulfate crystals adhere to the electrode plate, which will block the ion channel, resulting in insufficient charging and a decrease in battery capacity. The longer the idle time in the power-deficient state, the more severe the battery damage. Therefore, when the multifunctional snack truck is not in use, it should be recharged once a month to keep the battery down.
Regular inspection: During use, if the continuous mileage of the multifunctional snack truck suddenly drops in a short period of time, it is very It may be that at least one battery in the battery pack has a problem. At this time, you should go to the sales center or agent maintenance department for inspection, repair or assembly in time. This can relatively extend the life of the battery pack and save your expenses to the greatest extent.
Multifunctional snack trucks to avoid plug heating during charging: 220V power plug or charger output plug loose, contact surface oxidation, etc. will cause the plug to heat up, and the heating time will be too long. Causes short circuit or poor contact of the plug, damages the charger and battery, and brings unnecessary losses to you. Therefore, when the above situation is found, the oxide should be removed in time or the connector should be replaced.
There are also many places to pay attention to the charging method of the multifunctional snack car. When charging once, make sure that the power in the battery has been used up, and then recharge it. The multifunctional snack truck must take a longer time to charge once, and the charging time in the future needs to be strictly in accordance with the requirements of the instructions.