After using this electric garbage truck for a period of time, you will find that its performance and effect are not as good as the initial effect. At this time, you can see that its daily maintenance is important. When the editor brings you today, the product is being adjusted and cleaned. In detail, Qingzhou Hongri Vehicle Industry Co., Ltd. is a professional manufacturer engaged in product production for many years. Let us take a look.
The side brushes in the cleaning system are generally fixed on a typical four-bar mechanism. When working, the side brush has a certain degree of freedom in the front and rear, left and right, up and down directions, so it can not only stick to the road at any time, but also avoid obstacles from the front or the side.
The contact angle of the side brush to the ground should be carefully adjusted in order to obtain the desired effect. The rubber plates on the front and side of the side brush will concentrate the garbage in a position that is convenient for the suction mouth, and its height is also required. Adjust frequently.
The wide brushes are suspended on the chassis beams by hydraulic cylinders at both ends. When in the working position, the working pressure of the wide brush on the ground needs to be carefully adjusted. The position of the adjuster is shown in Figure 11. Turn the adjuster knob clockwise to reduce the pressure on the ground, and vice versa, when the width of the wide brush and the ground contact should meet the requirements. When adjusting, pay special attention to make the contact width between the two ends of the wide brush to the ground as the same as possible. Whether the position of the suction port of the sweeper is correct, to a certain extent, affects the effect of the sweeper's operation.
The above content is related to the cleaning system of the electric garbage truck. I hope it can bring you some help. If you are interested in this product, you are welcome Come and buy.